Gorm Five-Point Safety Harness National Standard Safety Rope Full-Body Double Hook TE Double Large Hook 1.8m for High-Altitude Work

Waist protection design for uniform stress distribution

4 cm widened webbing for enhanced durability

Back hanging point and chest adjustment buckle for secure fit

Length adjustment buckle and waist adjustment buckle for customizable sizing

Leg loop adjustment buckle for comfort and safety

Breathable cushioning waist pad (8 cm width, 6 mm thickness) for comfort and pressure distribution

Integrated connection rope with two hanging points to prevent accidental detachment

Back single and double hook hanging points available

Machine stitched with dense, uniform stitching for enhanced strength

Clear texture, high toughness, high-strength polyester material

Hooks available in small (11 x 6 cm, 2 cm opening) and large sizes (11.5 x 22 cm, 5.5 cm opening)

1. Safety belt should be hung high and used low to prevent swinging and collisions.

2. Use shock absorbers with ropes longer than 3 meters; self-locking hooks are exceptions.

3. Do not tie knots in the rope; hooks must be attached to connection rings, not directly to the safety rope.

4. Do not remove any components arbitrarily; replace ropes with added rope sleeves.

5. After two years of use, conduct batch sampling inspections; static load test at 2 kN with 5 mm elongation without breakage is required for continued use.

6. Connection points between safety belt, main lock, and main rope must be correctly positioned.

7. Avoid direct contact with mud, sand, or sharp objects.

8. Use environment temperature should not exceed 80°C.

9. Avoid contact with chemical substances.

10. The maximum fall arrest distance should not exceed 2 meters.