3M 6200 Gas Mask Half Facepiece, Compatible with Filter Cartridges And Filters, Firefighting Mask

5N11CN KN95 filter pad filters non-oily particles with ≥95% efficiency (e.g., dust, PM2.5).

Electrostatic filter media provides low breathing resistance and high protection efficiency.

Meets US NIOSH N95 standard and Chinese GB2626-2019 and GB2890-2022 KN95 standards.

Suitable for environments with toxic gases, organic vapors, paint fumes, benzene compounds, coal mining dust, gasoline fumes, printing, metal smelting, and other industrial dust operations.

1. Unfasten the lower head strap buckle.

2. Place the mask over the nose and mouth.

3. Pull the upper head strap over the top of the head.

4. Pull both ends of the lower head strap behind the neck and fasten the buckle.

5. Adjust strap tightness for a secure seal against the face, starting with the upper strap then the lower strap.

6. If straps are too tight, loosen by pushing the buckle outward with fingers.

The mask body is washable; filter cartridges and filter pads are not washable.

Use of non-3M filter pads is not recommended due to potential sealing issues and compliance risks.

Replace filter pads when breathing resistance noticeably increases.

For KP or P class filter pads used against oily particles, service life should not exceed 40 hours or 30 days.

Replace filter cartridges immediately if odor, taste, or irritation from contaminants is detected.

Follow all four replacement criteria; replace when any is met.

3M, founded in 1902, is a diversified technology innovation company with over 100 years of history.

Operates 49 core technology platforms and has developed nearly 60,000 products.

Products cover industries including industrial, transportation, construction, electronics, communication, commercial, and home sectors.

Committed to continuous innovation to improve quality of life worldwide.