3M 6200 Gas Mask Respirator Paint Welding Protection Activated Carbon Dust Chemical Pesticide Mask 620E Set

Filter pads (Model 5N11) ×2

Filter pad covers (Model 501) ×2

Instruction manuals

Dual filtration system for organic vapors, gasoline, organic steam, dust, chemicals including benzene, acetone, carbon disulfide, and ethers

Filter pad covers secure filter pads firmly for optimal filtration

NIOSH N95

GB 2626-2006 KN95

GB 2890-2009 P1

Dual filter cartridges for doubled filtration capacity and extended service life

Trapezoidal filter design for high adsorption efficiency and low breathing resistance

Rearward center of gravity reduces neck fatigue

Filter cartridges are not washable; establish a replacement schedule based on usage and exposure

Replace filter cartridges immediately if harmful odors are detected during use

2. Attach filter cartridges to mask body aligning marks; rotate left cartridge 90° clockwise, right cartridge 90° downward to lock

Inspect mask and accessories before each use for damage, deformation, or aging, especially face seal, inhalation valves, exhalation valve, and head straps

Replace damaged components promptly

Clean mask by removing filter cartridges and pads, wash mask body and accessories in warm water (below 49°C) with mild detergent; avoid alkaline soaps or detergents with moisturizers

Disinfect mask by soaking in diluted sodium hypochlorite solution (30 ml bleach in 7.5 L water), then air dry in clean environment

Store mask in protective bag or box when not in use to prevent contamination

null