AutoSet one-key automatic configuration and gesture zoom for fast parameter setup.
Supports Web remote control and Matlab direct data connection for multi-device collaboration.
Additional details
Serial bus triggering and decoding supporting protocols
I2C, SPI, UART, CAN, LIN.
7-inch capacitive touchscreen with 1024x600 resolution supporting multi-touch gestures.
Multi-language support with one-key switching among 10 languages.
Rich interface design including LAN (10M/100M), USB 2.0 Device and Host, PASS/FAIL output, TRIGOUT, SMB network file sharing.
Silent mode with buzzer off and automatic CSV file generation for segmented storage.
Additional details
High-speed waveform refresh rates
up to 120,000 wfm/s (normal mode), 500,000 wfm/s (Sequence mode).
16 trigger types including edge, slope, pulse width, and bus triggers with time search and navigation.
Additional details
Bandwidth options
70 MHz, 100 MHz, 200 MHz.
Channel configurations
2 or 4 channels.
Storage depth varies by model and channel mode
Item
Detail
70M and 100M models
single channel up to 50 Mpts/ch, dual channel 25 Mpts/ch, four channel 10 Mpts/ch.
200M model
single channel up to 100 Mpts/ch, dual channel 50 Mpts/ch, four channel 25 Mpts/ch.
Real-time sampling rates
Item
Detail
Single channel
2 GSa/s
Dual channel
1 GSa/s
Four channel
500 MSa/s
Additional details
Vertical resolution
12-bit standard, switchable to 15-bit enhanced mode.
DC gain accuracy
0.5%
Noise floor
50-70 μVrms
FFT analysis capability with up to 1 Mpts.
Product development and signal analysis.
Precise ripple measurement and switching loss analysis.
Mixed signal debugging and serial bus analysis.
Transient response testing and protocol decoding.
Education, scientific research, and production line quality inspection.
High-resolution FFT spectrum analysis and control.
High-speed template testing and unattended anomaly detection.
System Bode plot drawing and monitoring.
Passive probes (1 set per channel)
Main unit
Power cable x1
USB cable x1
User guide and calibration certificate x1
Measurement categories
Item
Detail
CAT I
Circuits not directly connected to mains power (e.g., protected secondary circuits).
CAT II
Circuits directly connected to low voltage equipment (household appliances, portable tools).
CAT III
Building distribution systems (distribution boards, circuit breakers, industrial fixed equipment).
CAT IV
Low voltage supply at the source (meters, main overcurrent protection devices).
Probe safety
Ground leads of standard probes must be reliably grounded.
Do not connect ground leads to high potential to avoid equipment damage and electric shock risk.
Additional details
Stock Code
688112
SIGLENT SDS800XHD series oscilloscopes deliver professional-grade, high-resolution waveform capture with ultra-low noise and deep memory, supporting advanced triggering, protocol decoding, and multi-device collaboration. Ideal for R&D, production, education, and quality control environments.
View
View
View