3M VHB™ Double-Sided Tape, Strong Adhesive, Traceless, Heat-Resistant, for ETC Use, Model 4910 Transparent, Length 42mm * Width 5mm, 3M M 5 Pieces

Easy to apply and remove without damage or marks.

Suitable for multiple scenarios without drilling.

1. Clean and dry the surface before application. Use a clean cloth with a small amount of isopropyl alcohol (IPA) to remove dust and fingerprints. Avoid household cleaners containing oils. Allow surface to air dry for a few minutes.

2. Apply one side of the tape to the object. Use a squeegee, roller, or fingers to apply even pressure and remove air bubbles.

3. Peel off the release liner and press the tape onto the second surface, applying pressure evenly. For bonding two hard surfaces, increase pressure to 15-50 PSI to remove bubbles. For bonding a hard surface to a soft surface, 5-15 PSI is recommended.

5. Allow 72 hours after bonding for full adhesion strength before testing.

Dust, grease, or dirt on surfaces will reduce adhesion.

Bonding below 15°C will affect adhesion performance.

Low surface energy materials (e.g., PE, PS, PP) have reduced adhesion; primer recommended.

Initial tack decreases in low temperatures; heating may improve tack for easier application.

Store tape rolls on racks.