Dual-valve pressure extraction system for richer coffee oil and visible thick crema
Safety pressure relief valve to prevent excessive internal pressure
Wood-grain handle with heat insulation for comfortable and safe grip
Spout designed for smooth pouring without dripping
Compact and exquisite design with classic color options
Semi-handcrafted aluminum construction inspired by traditional Italian style
1. Add drinking water to the lower chamber
2. Add ground coffee, level it without pressing, place round filter paper
3. Turn on the electric stove
4. Turn off the stove when coffee liquid flows halfway, then wait for completion
Heating water in the lower chamber generates steam pressure
Steam pressure pushes water up through the coffee grounds in the filter basket
Extracted coffee liquid rises through the central tube into the upper chamber
Dual valves increase pressure for enhanced extraction of coffee oils and crema
80ml water / 10g coffee powder → ~50ml coffee liquid
120ml water / 12g coffee powder → ~80ml coffee liquid
140ml water / 15g coffee powder → ~115ml coffee liquid
170ml water / 15g coffee powder → ~145ml coffee liquid
Initial use may contain aluminum residue and lubricant; recommend boiling with clean water before first use
Not suitable for coffee warming or re-brewing
Never heat the pot without water inside
Use only ground coffee powder
When using gas stove, flame size should not exceed the diameter of the lower chamber to avoid damage or burns
Fill water only up to the water level line, not above the safety valve
Do not tamp coffee powder; level it lightly to ensure proper extraction
Turn off heat when coffee liquid reaches halfway in the upper chamber to prevent boiling over
Ensure correct installation of silicone sealing gasket to avoid leaks
Allow pot to cool before disassembling
Remove coffee grounds and rinse with clean water; avoid abrasive materials or soda-based cleaners to protect surface finish
Use vinegar solution to remove discoloration caused by hard water if necessary
Clean sealing ring thoroughly after each use
Dry all parts separately in a ventilated area before reassembly to prevent odors and oxidation
Aluminum alloy material may develop oxidation spots over time due to contact with acidic coffee; this is normal and safe for food contact
Oxidation spots can be cleaned with citric acid or vinegar, though removal is not guaranteed
Classic color options and compact design make it suitable for coffee lovers seeking natural and comfortable coffee experiences with rich Italian-style crema and aroma
View
View
