CMYKSUPPLIES 3D Printer Filament PLA 1.75mm Compatible with Taz, Creality, Elegoo, Fuzhi, Aurora DIY Mini Drawing Pen Purple 1kg

Mechanical components and parts

Sports shoe soles

Biodegradable packaging materials

Electronic product housings

Insoles

Personalized products

Medical models

LEGO bricks

Medical orthoses

Automotive seals

Standard filaments and CMYK filaments

Neatly arranged filament lines (aesthetic and tangle-free)

Accurate filament diameter with minimal error (smooth extrusion, no clogging)

Upgraded toughness (high toughness, not easy to break)

Dry packaging to prevent moisture (avoids stringing)

Modified materials and bio-based raw materials (environmentally friendly and biodegradable)

Natural base materials made from pure natural plant sources such as corn starch

| Parameter | PLA | PLA+ |

|-------------------------|-----------------|-----------------|

| Density | 1.24 g/cm³ | 1.24 g/cm³ |

| Melt Flow Index | 42.4 ± 3.5 g/10min | 42.4 ± 3.5 g/10min |

| Melting Temperature | 160°C | 160°C |

| Tensile Strength | 35 ± 4 MPa | 35 ± 4 MPa |

| Elongation at Break | 12.2 ± 1.8% | 12.2 ± 1.8% |

| Flexural Strength | 91 MPa | 76 MPa |

| Flexural Modulus | 1913 MPa | 1911 MPa |

| Izod Notched Impact Strength | 5.4 kJ/m² | 9 kJ/m² |

| Heat Deflection Temperature (0.45 MPa) | 57°C | 57°C |

| Humidity in Drying Room | 100% | 100% |

| Filament Length (1.75mm) | 330-340 m | 330-340 m |

| Setting | PLA | PLA+ |

|-------------------------|-----------------|-----------------|

| Nozzle Temperature | 190–230°C | 190–230°C |

| Heated Bed Temperature | 60°C | 60°C |

| Printing Speed | 30–70 mm/s | 30–70 mm/s |

| Recommended Build Plate | Glass/Fiberglass Plate + PVP solid glue or masking tape | PEI/Glass/Fiberglass Plate + PVP solid glue or masking tape |

| Test Item | PLA | PLA+ | Conclusion |

|-------------------------|-----------------|-----------------|---------------------|

| Surface Finish | Fine and beautiful, no layer lines | Better than PLA | PLA+ > PLA |

| Hole and Pillar Fit (smaller is better) | 0.3 mm | 0.3 mm | PLA+ = PLA |

| Overhang Angle (smaller is better) | <45° | <30° | PLA+ > PLA |

| Bridge Span (larger is better) | 35 mm | 45 mm | PLA+ > PLA |

Manual measurement may have an error of ±0.1 mm.

To achieve higher print quality, it is recommended to dry the filament before use.

| Equipment | Temperature | Time |

|-------------------------|-----------------|-----------------|

| Forced Air Oven | 55°C | 8 hours |

| Tazhu Printer | 55°C | 12 hours |