Llano Camera Cleaning Kit APS-C CMOS Sensor Cleaning Swabs DSLR APS-C Sensor Cleaning Sticks CCD Cleaning Tools APS-C Format Cleaning Swabs *10

Alcohol-free formula to prevent sensor corrosion

Contains active micro-molecules for effective and safe cleaning

1. Set camera to Aperture Priority mode (A/Av), aperture to F16, manual focus (MF), focus ring to infinity, exposure compensation to 0, white balance to auto, ISO 200.

2. Photograph a well-lit white wall or paper filling the frame, then zoom in to check for black spots and note their positions.

3. Remember sensor dirt positions are inverted in the photo; use air blower to remove large dust particles before cleaning.

4. Apply one drop of cleaning liquid to the cleaning stick tip, allow 10 seconds for evaporation, then gently wipe sensor surface from one end to the other, flipping the stick to clean both sides.

5. Ensure battery level is above 80%, avoid using Bulb mode during cleaning, confirm removal of metal shavings and hard dust with air blower before cleaning.

6. For cameras with 5-axis stabilization, activate sensor cleaning mode and wait for sensor stabilization before cleaning; power off after cleaning.

16mm sticks and cloths for APS-C (half-frame) sensors

24mm sticks and cloths for full-frame sensors

Do not reuse cleaning sticks to avoid secondary contamination

Follow product manual instructions carefully for safe cleaning

Avoid cleaning in dusty or sandy environments without prior dust removal