Haili Universal Thickened V-Shaped Toilet Seat Cover Slow-Closing Quick-Release Urea Resin 818

Length

460 mm

Applicable Length

440-480 mm

Width

350 mm

Applicable Width

345-355 mm

Applicable Hole Distance

30-200 mm, 110 mm

U-type (Model 816)

Middle V-type (Model 079)

Made of urea-formaldehyde new material

Fire resistant and scratch resistant

Surface texture similar to ceramic

Ergonomic design for comfortable seating, conforms to hip curve

Seat height designed according to ergonomic standards

One-button quick installation and removal, tool-free, suitable for easy cleaning

Soft-close mechanism for quiet lowering

Durable urea-formaldehyde material with high strength and load-bearing capacity

Easy to clean surface that does not fade or yellow

Widened seat width for prolonged comfort

1. Place the base into the toilet mounting holes.

2. Adjust the base to the proper position.

3. Tighten screws to about 80% tightness.

4. Align the toilet seat holes and snap in place.

5. Adjust the toilet seat position.

6. Press the button to remove the seat; ensure front edge alignment before lateral alignment.

7. Fully tighten the screws.

8. Install stainless steel parts.

9. Complete installation by securing the toilet seat (tighten until no further turning is possible).

Small end faces up, large end faces up.

The toilet seat should be aligned with the front edge of the toilet first before adjusting left and right.

Avoid installing the seat too far back.

Front edge alignment is critical; left and right adjustments can be made afterward.

The rear distance is less important than front edge alignment.

Manual measurements may have slight deviations; actual product dimensions prevail.