Taili Seamless Adhesive Hook, No-Drill, Latex Paint Wall, Door Back Clothes Towel Bathroom Kitchen Hook

Nano no-trace technology ensures zero wall damage upon removal

Elastic extension technology allows gradual release of adhesive strength when pulled vertically downward

Not suitable for waxed walls (clean before installation), wallpaper, fabric walls, unfinished or gray walls, and surfaces with cracks or gaps larger than 0.2 mm

1. Clean and dry the wall surface thoroughly.

2. Peel off the adhesive backing from the white base plate.

3. Align and press the base plate firmly against the wall, pressing the top, middle, and bottom parts for 5 seconds each.

4. Attach the hook card and ensure no looseness.

5. Verify installation by gently pulling downward on the base plate; no loosening or detachment indicates correct installation.

Pull the adhesive strip vertically downward in the direction of the arrow.

Hold the back plate with one hand and slowly pull the adhesive strip with the other hand to remove without damaging the wall.

Avoid pulling the adhesive strip upward to prevent uneven stress and potential wall damage.

Adhesive strips can be replaced and reused for repositioning.

No-trace removal without wall damage

Small and compact design with reliable weight-bearing capacity

Available in standard and upgraded versions for different adhesion needs

For walls treated with wax, clean the installation area with a cleaning cloth before applying the hook.

Consult customer service for specific surface compatibility and product recommendations.