0.9 kg (bare tool), 1.1 kg with 2.0Ah battery pack
Dimensions (L x W x H)
119 x 59 x 190 mm
Battery
Compatible with 12V WORX battery system; primarily shown with 2.0Ah battery pack (actual configuration may vary)
Hydraulic noise reduction system
Oil pressure transmission replaces traditional metal-to-metal impact, significantly reducing noise and vibration for quieter and smoother operation (approximate noise level 75 dB), compliant with national occupational noise standards (GBZ/T189.8-2007) and NIOSH guidelines.
Low vibration and stable torque output due to hydraulic transmission and oil lubrication, enhancing user comfort and control.
Compact and lightweight design (119 mm length, 1.1 kg with battery) ideal for tight spaces such as cabinet corners, drawers, and overhead installations.
Precise low torque control down to 1 N·m at low speed for delicate tasks like small screws and hinges without damaging work surfaces.
High torque performance comparable to 20V tools with peak torque up to 50 N·m, maintaining torque with minimal decay during drilling and fastening.
Additional details
Wide application range
Suitable for mechanical screws M4 to M8 and standard bolts M5 to M8.
Premium hydraulic oil with high viscosity index and thermal stability ensures efficient and smooth torque transmission.
Three-speed impact modes plus intelligent auto-stop mode that prevents over-tightening by stopping impact once screw is fully driven (effective with typical M3.5x30mm screws in common materials).
Ring-shaped shadowless LED light with independent switch and two brightness levels for clear illumination in dark working environments.
SDS quick-release chuck for fast, single-handed bit changes; compatible with single and double-ended bits.
Robust sealing design with five-point positioning and wear-resistant coatings to prevent dust ingress and extend tool life.
Soft silicone anti-scald sleeve and soft-grip handle with balanced weight distribution for comfortable and safe operation.
Durable brushless motor delivering high efficiency and long service life (up to 800,000 uses).
Heat dissipation design with perforated insulation sleeve to prevent internal dust accumulation and prolong tool lifespan.
All data sourced from international testing laboratories including SGS, BV, ITS, DEKRA, and Bosch Testing Center.
Noise level measured at approximately 75 dB, well below occupational exposure limits.
Actual product appearance and specifications may vary; images are for reference only.
For optimal performance, use extension sleeves when using short bits.
Noise and vibration levels measured under laboratory conditions; real-world results may vary depending on environment and usage.
View
View
