Norhan STM32 Core Board Development Board Microcontroller Experiment Board STM32F030C8T6 Development Board Without Pin Header

3.3V LDO regulator with up to 800mA current output

8 MHz crystal oscillator (external)

High precision 32.768 kHz Epson RTC crystal oscillator

Internal PLL supports up to 72 MHz system clock

Mini USB interface for power supply and USB communication

Micro USB interface (on some models) for USB communication and power

Standard 2.54mm pitch 1x40 single row pin header (default not soldered)

SWD debug interface supporting JLink, STLink, ULINK, etc.

UART serial port interface compatible with 5V development boards

USB to TTL serial download support

BOOT mode selection jumper and button

Reset button

Power indicator LED

User LED controlled by PC13 pin for testing

ISP and DFU firmware download modes supported

PCB manufactured with immersion gold process for stable operation

Compatible with STM32F103C8T6 and STM32F103C6T6 pinouts and programs

Compatible with common core boards on the market with 10-pin expansion headers

Supports SWD 4-wire debug interface

Supports USB 2.0 communication

Supports TTL download via USB to TTL converter cable

High-quality crystal oscillators for stable clock signals

RTC with tamper detection and backup registers

Multiple GPIO pins exposed for external module connection

Power LED and function indicator LED included

Supports bootloader mode entry by pressing BOOT and RESET buttons

Supports programming via serial port, USB DFU, and SWD

OLED display 0.96 inch with 4 pins pre-soldered

Breadboard power module compatible with MB102 (5V/3.3V)

Large breadboard MB-102 (165mm x 55mm x 10mm)

Breadboard jumper wires (male-female, female-female)

USB to TTL programming board with CH340 module

LED lamp beads in multiple colors (red, yellow, green, blue, white)

Metal film resistors (1/4W 1KΩ)

Transparent double-layer storage box with removable dividers

Default firmware includes breathing LED effect

Firmware download via SWD, ISP, or DFU modes

STM32CubeProgrammer software recommended for firmware flashing (requires Java environment)

MicroPython support on STM32F401 and STM32F411 with external flash recommended for USB mass storage simulation

Pin headers are not soldered by default to allow flexible usage

Dimensions are manually measured; actual product may vary slightly

Compatible with 51 MCU DIP40 socket for easy ARM program debugging on 51 development boards

Supports multiple boot modes selectable via BOOT jumper and reset button

This product is ideal for embedded system learning, development, and prototyping with STM32 microcontrollers, offering rich hardware resources, flexible interfaces, and compatibility with popular debugging tools.