DELIXI Surface Mounted Large Panel Switch Socket 158 Series One-Gang Two-Way Ten-Hole Switch Socket

Suitable for walls where groove cutting is not possible; installation results in a noticeable protrusion from the wall surface.

Surface wiring without the need for embedded boxes; convenient and portable installation.

Stylish and simple white design, combining elegance with practicality.

Flexible installation adaptable to various wall types including tile, wallpapered walls, load-bearing walls, and iron sheet houses.

Complies with national regulations for load-bearing walls (drilling diameter less than 100mm).

Ideal for temporary or thin walls where embedded sockets cannot be installed.

Safety features include anti-misplug design with protective shutters, single-pole self-locking mechanism to prevent accidental electric shock and dust ingress.

Misplug protection suitable for pets, children, and elderly users.

High-quality tin-phosphor bronze socket inserts for excellent contact, corrosion resistance, wear resistance, and smooth plug/unplug operation (tested for 5000 insertions).

Upgraded large capacity terminal blocks with pull-clamp type terminals.

Dual installation hole design compatible with self-tapping screws and pan-head Phillips screws for user-friendly installation.

Supports wiring with 4x4mm² single-core hard wire, 4x4mm² multi-strand soft wire, 5x2.5mm² single-core hard wire, and 5x2.5mm² multi-strand soft wire.

Terminal spacing approximately 20mm.

Integrated honeycomb structure design for safety and durability.

Dual wire groove design accommodates wires of different thicknesses.

One-piece rear cover design ensures safety and stability.

Screws for installation are not included and must be purchased separately.

Product parameters apply primarily to the standard five-hole socket; dimensions and specifications may vary for other models.

Recommended accessories include BVVB pure copper core sheathed cables in various specifications, universal switch socket panel accessories, and household rechargeable multifunctional electric drills.

1. Use a flathead screwdriver to pry open the small hole at the bottom to separate the panel from the base.

2. Remove the sealing cover on the panel to allow wire entry.

3. Secure the surface mounted base with screws, connect the wires, then cover with the panel to complete installation.

Suitable for walls where secondary drilling would damage aesthetics.

Ideal for load-bearing walls, tiled walls, wallpapered walls, and temporary iron sheet houses.

Provides a safe, compliant, and aesthetically pleasing solution for surface wiring needs.

null