LAOA LA325208 Solid Insulated Needle Nose Pliers Flame Retardant 1000V Electrical 9-Inch

Overview

Certification & Testing

• Each tool undergoes 1000V dielectric testing before leaving the factory
• Flame retardant tested using industrial-grade methane gas flame at 20mm height for 10 seconds; flame height must not exceed 120mm within 20 seconds post-test
• Submerged 1000V high-voltage electrical test passed
• Ultra-low temperature test at -40°C for 2 hours with no insulation cracking or damage
• High temperature aging test at 70°C for 168 hours with no insulation damage
• Impact test from 0.6m drop height with no cracking or damage
• Adhesion and tensile strength tests on insulation layer with 20N force applied for 3 minutes; no peeling or loosening observed
• Abrasion and indentation tests at 70°C with repeated wiping and dielectric testing to ensure insulation integrity and legible markings