MEIWA Glass Privacy Film Window Sunshade Heat Insulation Static Sticker Bedroom Translucent Opaque 60x200cm

Static cling technology, no adhesive required

Easy to apply and remove without leaving residue

Reusable and repositionable

Protects privacy and prevents accidental exposure

Environmentally friendly and non-toxic

Embossed 3D surface enhances home aesthetics

Backed with a protective film that must be removed before application

Excellent craftsmanship

1. Measure the glass surface accurately (length and width).

2. Cut the film with an additional 0.5 to 1 cm margin to prevent gaps.

3. Prepare a spray bottle filled with clean water and add a small amount of mild detergent; shake well.

4. Clean the glass thoroughly to remove dust and dirt to avoid bubbles.

5. Peel off the protective backing from the film.

6. Align the film on the glass and use a squeegee or similar tool to smooth from the center outward, removing water and air bubbles.

7. Use small pieces of transparent tape to hold the film edges if needed.

8. Before water is fully removed, the film can be repositioned slightly.

Not suitable for curved glass, uneven or textured glass surfaces, or broken glass.

Some glass installations may cause light leakage due to improper fitting.

PVC material may emit a slight odor after unpacking; ventilate the area before installation if sensitive to smells.

Minor wrinkles may appear after unrolling due to PVC’s stretch properties but do not affect performance.

The product has passed quality inspections and is safe to use.

The film is designed for repeated use and easy maintenance.