Llano Waterproof and Shockproof Case for DJI Pocket 4 Camera, Underwater 50m Diving Swimming Protective Cover for Pocket Gimbal Action Camera Accessories

316 stainless steel buttons tested for durability with over 10,000 presses without failure

Enhanced press-lock buckle for secure sealing without loosening

Pressure-enhanced silicone sealing ring that increases sealing tightness with water pressure

High-transparency tempered glass lens with AR anti-reflective coating and 9H hardness for scratch and drop resistance, maintaining original image quality underwater

Full-body protective "armor" design for comprehensive camera protection in complex underwater environments

Precise button alignment matching the camera’s original buttons for easy operation

Cold shoe mount for accessory expansion such as underwater lights, fill lights, and waterproof microphones

Compatible with handheld buoyancy sticks (sold separately) to prevent accidental loss underwater

1. Open the waterproof case by unlocking the A buckle.

2. Insert the action camera as shown.

3. Place the anti-fog sheet inside the case.

4. Lock the case by pressing the back cover until secured.

Before use, check all parts for completeness.

Perform a water test by placing a paper note inside the case and submerging for 30 minutes; check for moisture.

Ensure the sealing ring is clean and properly installed.

Confirm the back door and locking buckle are securely closed.

Clean the camera lens before installation to avoid image quality degradation.

After use in water, rinse the case with fresh water to prevent salt corrosion.

Store the product in a cool, ventilated, and dry place; storage temperature should not exceed 40°C.

Data and test results are based on llano laboratory measurements.