Distance from mounting hole to inner ring of toilet bowl (B)
≤ 85 mm
Mounting hole spacing (C)
130–215 mm
Distance from water tank to mounting hole (D)
≥ 25 mm
Suitable for common toilet shapes and water tank positions including outer arc, parallel, inner arc/inner irregular, square shapes
Additional details
Front section shapes
V-shaped, U-shaped, square
Compatibility status
OK for most shapes; some shapes may not be aesthetically pleasing or may not fit (consult customer service for details)
Four comfortable cleaning modes tailored for family needs
rear wash, front wash (female), child wash, massage wash
Four adjustable water temperature levels
Off, Low (~36.5°C), Medium (~38°C), High (~39.5°C)
Five adjustable cleaning intensities and nozzle positions with indicator lights
Child wash mode with three water temperature settings and three intensity levels for gentle cleaning (use under adult supervision)
Over 99% nozzle sterilization rate certified by authoritative testing (99.70% and 99.60% against E. coli and Staphylococcus aureus)
Dual active water filtration system removing sand, algae, rust, red worms, and other micro-particles
Upgraded instant ceramic heating element for rapid and constant water temperature
Additional details
Seat heating with four adjustable temperature levels
Off, Low (~34°C), Medium (~38°C), High (~40°C)
Surface temperature of seat
Approx. 34°C to 40°C
SIAA antibacterial certification (ISO22196) by Japan’s forKOHKIN and Ishizuka Glass Co., Ltd.
Low noise operation with soft-close toilet lid to prevent disturbance
Eight layers of safety protection including real-time electrical safety monitoring, waterproofing (IPX4), leakage protection, voltage stabilization, flame retardant materials, temperature sensors, and anti-scald features
Additional details
Rated Power
1180 W (measured at 15°C inlet water temperature), maximum power 1568 W
Power Supply
220 V, 50 Hz
Maximum cleaning water flow
0.57 L/min (based on GB/T23131-2019 standard, rear wash strong mode)
Water heating method
Instant ceramic heating
Water pressure range
0.049 MPa (flowing) to 0.735 MPa (static)
Water temperature range
5°C to 35°C (inlet)
Ambient temperature range
0°C to 40°C
Approximately 3.2 kg
CQC Mark Certification with waterproof test report
MA and CNAS certifications
Cleaning flow rate may decrease if inlet water temperature is below approximately 10°C
Child wash mode requires adult supervision
For detailed compatibility and installation inquiries, please contact customer service
View
View
