DAIEN Tile Drill Bit Dry Hammer Drill Marble Tile Glass Hole Saw Thickened Diamond Grit 12mm

Cooling wax can be replenished; if wax is depleted, water can be used as alternative coolant

Drill bits maintain sharpness and do not lose diamonds during use

| Model | Diameter | Max Drilling Depth | Shank Length | Total Length | Shank Type |

|-------|----------|--------------------|--------------|--------------|------------|

| DAIEN-6mm | 6 mm | ≤ 30-35 mm | 33-35 mm | 65 mm | Hexagonal |

| DAIEN-8mm | 8 mm | ≤ 30-35 mm | 33-35 mm | 65 mm | Hexagonal |

| DAIEN-10mm | 10 mm | ≤ 50 mm | 36 mm | 80 mm | Hexagonal |

| DAIEN-12mm | 12 mm | ≤ 50 mm | 36 mm | 80 mm | Hexagonal |

1. Maintain a light pressure at approximately 45 degrees to avoid slipping.

2. Keep high rotation speed throughout drilling.

3. Start by creating a crescent-shaped positioning groove.

4. Drill vertically while gently shaking the drill to facilitate debris removal and increase drilling speed.

5. For angle grinder use, an additional adapter chuck is required.

6. Avoid using ordinary impact drills.

Dimensions are manually measured; a 1-3 mm deviation may occur.

Different batches may ship with two random variants; 6mm size only.

Cooling wax is the key to temperature control enabling dry drilling.

Suitable for over 90 holes on 10mm ceramic tile without water.

Ideal for situations where water use is inconvenient or impossible, such as high-altitude drilling or near hidden electrical wiring.

Diamond grit brazed with needle welding technology

Internal cooling and lubricating wax

Ceramic tiles, glazed tiles, marble, granite, microcrystalline stone, quartz stone, ordinary glass, ceramics

Electric drills

Angle grinders (with adapter)

Sharp, durable diamond tips

High heat resistance due to internal cooling wax

No diamond loss during use

Easy and efficient dry drilling without water

null