HEYGEARS Pulse Peeling Module 2 3D Printer Accelerator - Main Unit Only (Excludes Pulse Material Tray)

CN¥3,433.60

SKU: 100297943734

Status:In Stock (5)

ID: 100297943734

Weight: 3720.00 g

Dims:366x279x202 mm

Package Contents

Pulse Module 2 Host

Product Description

Overview

Brand: HEYGEARS

1. Precision Pulse Control

Newly upgraded pulse control for enhanced accuracy.
Improved fine structural surface quality.
Supports stable formation of pillar structures with diameter less than 1mm* (minimum printable pillar diameter varies by material; refer to material guide).
Pillars are resistant to bending and deformation.
Significant surface quality improvement.

2. Thin Wall Printing

Achieves high-quality printing of thin walls less than 3mm*.
Effectively eliminates abnormal layer lines.
Produces smoother and glossier surfaces.

3. Large Cross-Section Printing

No horizontal stripes in large cross-section prints.
Reflex2 printer combined with Pulse Peeling Module 2 ensures perfect large cross-section model formation without detail loss.
Compared to other devices printing the same model and resin, HEYGEARS shows superior results with no layer separation or print failure.

Similar Products

Out of Stock

3D printing accessories

Caige 3D Printer Filament Dryer Box Accessory Storage Box Heater Moisture-Proof Dust-Proof Continuous Drying Storage Box

[Essential for Beginners] 3D Material Drying Oven

CN¥198.00

View

In Stock

3D printing accessories

Caige 3D Printer Accessories, Anti-Static Model Sanding Tool Kit, Model Figure Edge Trimming And Cleaning DIY Tool Kit

3D Model DIY Tool Kit

CN¥39.00

View

In Stock

3D printing accessories

Sanlv 3D Printing Consumables Drying Box, Moisture-Proof And Dust-Proof, 3D Printer Accessories, Drying And Storage Box, PLA ABS Nylon Carbon Fiber Consumables Storage Heater, Consumables Drying Box S4

S4 White - Medium Regular

CN¥586.53

View

Out of Stock

polymaker3D printing accessories

Polymaker Polydryer Box, 3D Printing Consumables Drying Box, ABS PETG TPU Nylon PLA Consumables Storage Box, Drying Box, Suitable for Tuozhu Chuangxiang 3D Plastic Box

Polydryer Box, Sealed Storage Container

CN¥119.00

View

4. Multi-Angle Cantilever Printing

Supports small-angle cantilever formation without stress.
Successful printing at angles from 10° to 90° without supports.
Reduced peeling force and overall improved print quality.

5. Pulse Peeling Technology

Pulse Peeling Module 2 uses periodic positive and negative pulse fluctuations to increase peeling angle, enabling lateral peeling.
Compared to non-pulse peeling mode, it reduces peeling force significantly.
Requires use with pulse resin tray.
Dual-layer film plus pulse diffusion strip design controls gas flow path.
Over 20 morphology optimizations ensure consistent vibration frequency across the entire print area.
Peeling force reduced by approximately 50%.

6. Compatibility

Reflex2 and Reflex2Pro printers paired with Pulse Peeling Module 2 effectively reduce peeling force by about 50%*.
Minimizes time and effort needed for support optimization.
Breaks through manual support optimization limits.
Enhances overall print quality.

7. Support Structure Optimization

Peeling force reduction allows setting lower support formation critical angles (down to 15°), reducing support area and improving post-processing efficiency.
Enables more extreme support parameters:
Support point diameter can be reduced by up to 30%*.
Support point area can be reduced by up to 70%*.
Data based on HEYGEARS laboratory tests using PAU10 material.

8. Module Specifications

Item	Detail
Input Voltage	24 VDC
Power	25 W
Dimensions	310 × 148 × 235 mm (12.52 × 5.83 × 9.25 in)
Weight	3 kg

Values marked with * depend on material properties and specific printing conditions; please refer to the material guide for details.