Sidande DSLR Camera Grip Compatible with Canon 5D3/5D4/5DSR (with Infrared)

Compatible with external flash and battery packs for extended shooting sessions.

1. Locate and open the battery compartment on the handle.

2. Insert prepared batteries into the battery holder, observing correct polarity.

3. Insert the battery holder into the handle compartment, open the carrying ring to insert, then close and secure the compartment cover.

4. To remove, reverse the above steps.

1. Open the camera’s battery compartment and remove the camera battery.

2. Insert the handle’s electrical contacts into the camera’s bottom connector.

3. Align the screw with the camera’s tripod socket and tighten securely.

4. Turn on the camera power switch and confirm the LCD displays information before use.

This handle is only compatible with designated devices.

To prevent short circuits caused by metal contact with power terminals, cover the interface when not in use.

The handle does not have a power switch; use the camera’s power switch to turn power on or off.

Do not expose battery packs to fire or water, and avoid short-circuiting battery pack terminals.

Do not disassemble or assemble the battery pack.

Use only the specified charger for charging.

Remove batteries from the battery holder if stored separately or unused for long periods.

When purchasing, compare the appearance with original products focusing on workmanship, seam tightness, and surface gloss.

Different materials affect the feel; this handle uses the same material as the camera body.

For professional cameras, a professional battery handle like sidande is recommended.