CMYKSUPPLIES 3D Printing Polishing Liquid PLA/ABS/PETG Polishing Liquid Model Adhesive 3D Printing Consumables Polishing and Grinding Layer Removal

Demonstrates significant improvement before and after polishing on models such as board games, miniature models, and industrial parts

Polishing results are for reference only; actual effect depends on the physical product

Models must be 3D printed by the user; the product is intended as a polishing liquid for printed models

Polishing liquid is corrosive; recommended immersion time should not exceed 3 seconds

Use metal, glass, or ceramic containers for soaking

Due to chemical reactions with PLA and ABS, test on a small area before full application

ABS and PETG printed models may have inherent gloss and may not require polishing

Polishing liquid is volatile and flammable; keep away from flames and ensure good ventilation

Wear gloves during use; if skin contact occurs, wash immediately to avoid irritation or allergic reactions

Keep out of reach of children and pregnant women to prevent accidental ingestion

After use, tightly close the bottle cap and store in a cool place

Strictly prohibit exposure to fire, direct sunlight, and fireworks

Corrosive liquid; handle with care

Flammable and volatile; maintain proper ventilation and avoid ignition sources

Keep away from children and sensitive groups

Avoid direct skin contact and ingestion

Store in a cool, dry, and well-ventilated area away from direct sunlight and heat sources

Polishing effects and compatibility may vary depending on material and printing conditions; actual results should be confirmed by testing