




Handheld showerhead *1, overhead shower *1, spray gun *1, main body *1, instruction manual *1, angle valve *2, square pipe *2
1. When facing the wall, ensure the water inlet configuration is left for hot water and right for cold water. The outlet connector should form a 90° angle with the wall.
2. The center distance between hot and cold water inlets should be 14-16 cm and aligned on the same horizontal axis.
3. The water inlet protrusion from the wall should be ≤1 mm; the recess depth should be ≤8 mm. If beyond this range, please contact customer service.
6. From the water inlet center, reserve ≥30 cm space to the left and 25 cm to the right.
7. Pre-spray installation location should be at least 30 cm away from the air outlet of the bath heater.
8. For recessed installation depths exceeding the standard, consult customer service for extended pipe options.

Silver | Dual-Function Simple Shower Head AE3254CP
CNÂ¥299.00
![X-GRKE [Germany] Shower Faucet Set Full Copper Body Bathroom Shower Set High Pressure Shower Mixer Valve](https://img30.360buyimg.com/sku/jfs/t1/431113/20/9125/101279/6a03d838F5c7d6928/0833320320084b29.png)
Allcopper shower mixing valve [threepiece set] gunmetal gray
CNÂ¥142.74
1. When facing the wall, ensure water inlets are left hot and right cold, with outlet connectors at 90° to the wall and both hot and cold outlets level with the floor. If your plumbing is reversed, the thermostatic shower cannot be installed properly.
4. The thermostatic shower requires simultaneous hot and cold water supply to function. If the water heater is not powered on, hot water will not be available.
![ARROW Shower Set Adjustable Brass High-Pressure Showerhead AE3254CP [15% Government Subsidy]](https://img30.360buyimg.com/sku/jfs/t1/295991/40/12323/44646/6846a3eeF82f58ece/01e6fd0cba008f8b.png)
[Ultra High CostPerformance Model] TwoFunction with Lift Rod AE3254CP
CNÂ¥409.89

Silver Adjustable Model | DualFunction Simple Shower Head
CNÂ¥349.00