Lazy Corner Suction Cup Storage Rack Wall-Mounted Bathroom Sink Square No-Drill Shower Organizer

Smooth marble

Hard glass

Smooth metal

Acrylic boards

Various household walls with suction cup compatibility

Gypsum walls

Wallpapered walls

Painted walls

Rough or uneven tiles and marble

Textured metal surfaces

Strong suction adhesion with no trace left after removal

Reusable and washable suction cups with self-adhesive backing

Built-in drainage holes at the bottom for ventilation and hygiene

Suction cups are movable for flexible repositioning

Rounded edges with no burrs to prevent hand scratches

Stable and secure load bearing up to 5 kg

Suitable for whole-house wall mounting without drilling

1. Clean and dry the wall surface thoroughly before installation

2. Attach the bottom support clip to the storage rack base

3. Insert two suction cups from bottom to top into the clips

4. Remove protective film from suction cup adhesive

5. Position the rack horizontally close to the wall

6. Rotate suction cups clockwise to tighten and secure

7. Allow 24 hours of static adhesion before placing items

Ensure the wall surface is clean and dry for optimal suction

Avoid installation on uneven or porous surfaces and humid areas

Do not exceed the maximum load capacity or hang fragile/valuable items

If suction weakens due to dust or moisture, wash suction cups with water and air dry before reapplying

For aged or hardened suction cups, soak in 70-80°C warm water for 5 minutes to restore elasticity, then dry and reattach using heat expansion method (e.g., hair dryer)

Avoid installation near wall gaps or seams