Midea Desktop Water Purifier PCB Filter Ice Cube 2.0 Water Dispenser Home Ice Making Water Purifier Compatible with JLB3707T-RO

PCB patented full-encapsulation independent waterway design

Advanced integrated technology with efficient four-stage filtration

Original genuine product with anti-counterfeit verification via WeChat scan

1. Disconnect power before replacing filter

2. Remove water tank cover and take out water tank (ensure water tank is removed before filter removal)

3. Rotate filter counterclockwise to eject

4. Install new filter by rotating clockwise, aligning with the dot

5. Replace water tank and cover

6. Reconnect power and reset filter life by pressing and holding reset button for 3 seconds

When PCB/RO indicator flashes, follow replacement steps and reset filter life

Long press reset button for 3 seconds to reset filter status

Do not unpack or use filter before installation

Avoid storage below 4°C or in direct sunlight to prevent aging or deterioration

Keep away from flammable, explosive, or volatile environments

Avoid proximity to heat sources or open flames

Use filter promptly after water flow; not suitable for long-term storage

TDS value may increase after filter replacement due to food-grade lubricant and activated carbon initial use; perform at least three flushes after installation

If new filter does not produce water, check power and water valve, filter connection, installation order, and water tank fill status

For slow or no water flow, try power cycling the purifier or adding a gasket for certain models

Contact professional service if issues persist

Filter models include MRC20 series, e.g., MRC2088-1000G (basic 1000G model)

Compatible with device models GMA80-240400, DSI8101-24

DIY filter replacement supported with detailed steps available via customer service

Midea water purifier and filter products are guaranteed genuine with official support