





Pneumatic spray gun *1
Product Specifications
Suitable for a wide range of scenarios including furniture spraying, metal crafts, plastic products, woodworking spray painting, automotive repair, and model graffiti.
Made of high-quality alloy steel material, resistant to rust, wear-resistant, and durable.
Long-lasting use and flexible operation.

Carpentry drill bits (set of five, flexible)
CNÂ¥10.00

K3 Upper Pot 0.5 Caliber [Jingpei]
CNÂ¥49.20

Electric drill to electric saw adapter + 6 saw blades
CNÂ¥39.84
Multiple models and nozzle diameters available.
| Item | Detail |
|---|---|
| Upper cup G capacity | 400ml, nozzle diameters same as lower cup S. |
| Lower cup S capacity | 400ml or 1000ml depending on model. |
| Item | Detail |
|---|---|
| W-77-1G | 2.0 mm nozzle, 400ml capacity |
| W-77-2G | 2.5 mm nozzle, 400ml capacity |
| Item | Detail |
|---|---|
| W-77-1S | 2.0 mm nozzle, 1000ml capacity |
| W-77-2S | 2.5 mm nozzle, 1000ml capacity |
Use nozzle diameter 1.8mm or above for primer spraying.
Use nozzle diameter 1.5mm or below for topcoat spraying.
Portable hook for hanging
Spray width adjustment
Paint output adjustment
Flow cap and nozzle
Valve switch
Material inlet connector
Trigger
Connection nut
Air inlet connector
Paint cup
Air volume adjustment
1. Pour the pre-mixed paint into the paint cup and connect to the material inlet.
2. Connect compressed air to the air inlet.
3. Pull the trigger and adjust working air pressure between 3.5-4.5 bar.
4. Adjust paint output and spray width as needed.
5. Spray on clean surfaces with parallel and vertical strokes at approximately 20 cm distance.
High hardness alloy nozzle
Integrated high-speed air channel for stable and smooth air transmission

Avocado Green Large 65L
CNÂ¥125.00